Stay updated with Mingxu’s latest developments, including new product launches, overseas project deliveries, and our expanding footprint in Belt and Road markets.
A dual auger vortex snow thrower is heavy-duty professional snow removal machinery that completes snow gathering, snow crushing and long-distance snow throwing continuously in one operation. Unlike snow plows that only push snow to the roadside and form snow piles, this thrower sucks in snow, breaks up compacted snow blocks and ejects snow far away, eliminating extra secondary snow transportation work.
This dual auger vortex snow thrower from Qingzhou Mingxu Supply Chain is developed for emergency snow clearing after heavy snowfall. The all-in-one snow throwing design is ideal for municipal sanitation teams, highway maintenance fleets, equipment rental companies, airport management departments and overseas winter machinery distributors. It effectively solves low work efficiency caused by continuous heavy snow.
Two front spiral augers rotate synchronously to collect scattered snow and cut hard compacted snow. Serrated auger blades keep breaking snow lumps and feed snow evenly into the vortex impeller chamber. Compared with single-auger snow blowers, it greatly reduces snow clogging and supports long continuous operation during heavy snow events.
The engine drives the vortex impeller to rotate at high speed and generate strong airflow to accelerate snow mass. Snow is ejected directionally through the discharge chute with concentrated and stable throwing performance. Snow can be thrown directly to open roadside areas or into dump trucks for hauling away, avoiding extra secondary snow handling.
The snow discharge chute can rotate more than 300 degrees left and right under hydraulic control. Operators adjust the throwing direction from inside the cab without stopping the machine. It performs extremely well on narrow urban roads, traffic lanes and parking lots where snow storage space changes frequently.
The total machine weight is controlled within 4.2 tons. The thickened reinforced steel frame ensures structural rigidity while keeping low ground pressure, so it will not scratch asphalt roads, concrete pavements or brick paving. The compact body fits the width limits of township roads and residential streets.
The 162kw diesel engine delivers sufficient power reserve for long-hour continuous operation in frigid weather. The cooling system is optimized for cold climate, so the machine rarely overheats during urgent snow removal missions.
表格
|
Item |
Standard Configuration |
Practical Remarks |
|
Machine Type |
Dual auger vortex snow thrower |
Integrated snow collecting, crushing & throwing |
|
Engine Power |
162 kw |
Cold-start kit optional for frigid regions |
|
Max Snow Removal Capacity |
1500 tons per hour |
Actual output depends on snow density and depth |
|
Chute Rotation Angle |
≥300° left & right |
Hydraulic in-cab control |
|
Total Weight |
≤4.2 tons |
Pavement-friendly, easy transportation |
|
Working Width |
2.8–3 m |
Wide one-pass coverage for main roads |
|
Snow Throwing Distance |
20–30 m |
Subject to snow humidity and engine load |
Note: Configurations and optional accessories vary by order and export market. Please request the latest technical datasheet from Mingxu before placing orders. If you need customized clearing width, longer throwing distance, cold-resistant modification or loader mounting brackets, ask for dedicated technical solutions instead of relying only on general descriptions.
The engine power drives two systems simultaneously: the hydraulic pump that supplies power for chute rotation cylinders, and the main drive shaft that runs the dual augers and vortex impeller synchronously.
When the machine moves forward, rotating augers draw snow into the inlet and cut up hard compacted snow. After snow enters the vortex chamber, the high-speed impeller accelerates snow particles and shoots them out along the discharge chute. Operators adjust the chute angle to control where snow lands.
Match driving speed with snow thickness during operation; slow down for deep and dense snow to prevent overload. Operators must stay clear of the snow ejection path to avoid flying ice chunks. Deploy stabilizers when working on sloped ground to keep the machine stable.
Operators must master the control layout, load limits and safety procedures before starting work. Never run the machine beyond its rated snow handling capacity.
The integrated snow gathering, crushing and long-distance throwing design works best for heavy snow conditions with limited roadside snow storage space:
Municipal crews use this machine to clear arterial roads, community streets and sidewalks, and open blocked drainage inlets. Unlike snow plows, it will not pile snow over curb drains and reduce icing risks.
Highway fleets deploy it for emergency snow clearance after snowstorms. The 1500 t/h high throughput quickly reopens traffic lanes. Snow can be thrown outside guardrails or directly into hauling trucks, which is critical for highways with strict traffic time limits.
Airport taxiways, logistics parks and large yards have wide flat ground. The 2.8–3 m working width accelerates snow removal to guarantee normal vehicle and cargo circulation.
Tourist resorts keep access roads open for visitors. Farmers clear snow from farm roads, livestock passages and irrigation channels to prevent traffic blockages in winter.
Rental companies gain strong competitiveness with this high-capacity snow thrower. It handles heavy snow jobs that small snow blowers and ordinary snow plows cannot finish efficiently, winning large municipal and highway winter service contracts.
For extreme conditions such as ice crust and ultra-deep snow, buyers should evaluate snow hardness, site space and supporting hauling vehicles before finalizing purchase plans.
Snow removal efficiency is not only measured by hourly snow throughput. Equipment transportation, operator scheduling, downtime from snow clogging, secondary snow relocation and site coordination all affect total emergency clearance time and cost.
A dual auger vortex snow thrower brings these obvious benefits when matched with heavy snow conditions:
· Eliminate secondary snow relocation: Snow is thrown far away directly, no extra loaders and dump trucks for snow transfer.
· Reduce on-site equipment quantity: One snow thrower replaces the combination of snow plow plus wheel loader.
· Flexible snow discharge: No need to reposition the whole machine frequently; just rotate the chute to adapt to changing site layout.
· Anti-clog performance for wet snow: The dual auger crushing structure minimizes downtime caused by snow blockages.
· Fast emergency response: High hourly capacity shortens road closure time and reduces traffic disruption caused by snowfall.
This machine is not universal. Light snow and narrow sidewalks are better handled by small sweepers. The most cost-effective choice depends on average snow depth, snow type, roadside storage space and annual snow removal workload.
Before purchasing winter snow removal machinery, compare machine parameters with local working conditions. A clear requirement list also makes supplier quotations easier to evaluate.
1. Define snow conditions: Confirm whether most snow is fresh powder, wet heavy snow or hard wind-packed snow.
2. Evaluate job sites: Check road width, roadside snow storage space, pavement type and ground gradient.
3. Confirm key working data: Verify required clearing width, throwing distance, machine size and transport conditions.
4. Check cold-climate adaption: Learn about cold-start systems, fuel preheating and cold-weather modification options.
5. Assess maintenance accessibility: Confirm lead time for wearing parts including auger blades, seals and hydraulic hoses.
6. Calculate total ownership cost: Compare purchase price, fuel consumption, freight, spare parts and labor expenses.
7. Verify export after-sales support: Confirm export packaging, warranty scope, spare parts kits and import compliance requirements for target countries.
Overseas bulk buyers must confirm local import regulations, emission standards and road traffic rules. If you want to compare other models, check Mingxu’s snow sweeper, snow plow and de-icing spreader product pages for more winter equipment solutions.
Daily inspections and standardized operation keep the machine ready throughout the snow season and avoid unexpected breakdowns. Strictly follow the manufacturer’s maintenance schedule and adjust according to local working severity.
Inspect auger blades, chute liners, hydraulic hoses, welds and fasteners for wear and cracks. Check engine oil, hydraulic oil, coolant, fuel and antifreeze levels. Test chute rotation, control levers, warning lights and emergency stop device. Remove stones and metal debris inside the auger chamber. Brief operators on site hazards, underground pipelines and safety zones.
Never work with snow depth exceeding the rated load capacity. Avoid hitting curbs, stones and hard obstacles to protect auger cutting edges. Stop work immediately if abnormal vibration, sharp noise or hydraulic leakage occurs. Keep all personnel away from the snow ejection trajectory. Do not direct the discharge chute toward vehicles, buildings or crowds.
Clean all residual slush and snow from augers, impeller and chute completely to prevent freezing overnight. Park the machine on flat, well-drained ground. Release hydraulic pressure and shut down the engine following standard procedures. Record worn components, oil leaks and abnormal faults for timely repair before the next snowfall.
Stocking common wearing parts in advance is essential for snow service teams. Equipment breakdowns during snowstorms will seriously delay emergency road clearance.
1. What is the main application of the dual auger vortex snow thrower? It is heavy-duty professional snow removal machinery for large-scale snow clearance on highways, municipal roads, airports and industrial yards. It breaks compacted snow and transports snow by long-distance throwing.
2. What is the maximum snow removal capacity of Mingxu’s standard model? The standard unit can process up to 1500 tons of snow per hour. Actual capacity will drop when handling wet, dense and deep snow layers.
3. Can the discharge chute adjust throwing direction freely? Yes. The hydraulically powered chute rotates more than 300 degrees left and right. Operators control the direction from the cab without stopping the machine.
4. Is this snow thrower suitable for rental companies? Absolutely. It can handle heavy snow jobs that ordinary snow plows cannot manage. It enjoys stable seasonal rental demand in cold northern regions with heavy snowfall.
5. What should overseas buyers confirm before placing export orders? Confirm final machine configuration, technical drawings, spare parts package, warranty terms, shipping plans and import compliance requirements of destination countries. Bulk buyers can negotiate pre-shipment factory inspection and technical guidance.
The dual auger vortex snow thrower is a high-value winter asset for municipal maintenance teams, highway contractors, equipment rental operators and overseas machinery distributors dealing with heavy snowfall. Featuring dual auger snow crushing structure, vortex throwing system, 300° hydraulic rotatable chute and lightweight reinforced frame, it efficiently clears deep and compacted snow and greatly cuts down secondary snow handling procedures.
A wise purchasing decision relies on full evaluation of local snow characteristics, roadside storage limits, throwing distance requirements, pavement protection, spare parts supply and long-term operating costs. Cross-check these factors against the supplier’s official technical specifications to select a snow thrower that matches current snow-clearing tasks and long-term fleet planning.
If you are sourcing winter snow removal equipment, expanding your rental fleet or arranging bulk overseas machinery orders, Mingxu can help you evaluate suitable configurations and procurement plans. Visit the dual auger vortex snow thrower product page and contact us to share your working conditions, request formal quotations, confirm custom modifications and obtain full technical documentation for your purchasing arrangement.
